Secureflex Roller Shutters - Data Sheet

DETAILS | ORDER SHEET

SHUTTER CURTAIN
Constructed from pre-galvanised material, designed to provide a hollow section panel with CFC and HCFC free thermal infill. Each panel section is 100mm deep with twin-ribbed face for rigidity. Each alternate panel is to include advanced bonded
composite anti-cut bars over the bottom 1.8 metres with added side load fittings

END LOCKS

The curtain, when assembled is held in position with purposely-designed injection moulded end fittings, manufactured from hardwearing nylon-6.

BOTTOM SEAL

The bottom panel of the shutter is terminated with a purpose designed steel section complete with interlocking (EPDM) rubber weather seal.

BARREL

Manufactured from seamless mild steel tube to BS4760 Grade 50C. Size to suit door width and height. Maximum barrel deflection 1:400. Fitted with precisionmachined BDMS axles to BS970 EN33 blocks. Sealed with protective paint.

MAIN SUPPORT BRACKETS

The main support brackets for the barrel and motor unit are manufactured from mild steel plates of varying thickness and incorporate the necessary fixing positions for securing back to the opening structure.

VERTICAL SIDE GUIDES

Formed from pre-galvanised material having a minimum thickness of 2.5mm incorporating twin vertical brushes on both inner and outer face of the guide. Brush carrier is constructed from PVC of medium impact strength, finished black and incorporating twin siliconised polypropylene weather strips, these running the full height of the door guide. The guide form is designed to allow
reduced working faces and tapered inner faces to provide automatic interlocking/retaining feature for performance of retention under wind load.
Complete with continuous 100 x 65 galvanised fixing angle.

OPERATION

The door is arranged for an electric motor unit with manual hand hoisting and lowering facility. The motor unit is complete with an in-built safety drive system. Operating voltage 400V 3 phase IP54 protection 60% duty cycle maintenance free and TUV tested, complying with all current European safety standards.

SOUND REDUCTION/THERMAL INSULATION

The Secureflex roller shutter has a weighted sound reduction value of 18dB (BS 5821 Part 3: 1984) and an insulation value of 1.4 W/M2


Technical Information
CE Mark (Declaration of conformity)
Type Approval (Chiltern Dynamics - UKAS approved test laboratory)
Mechanical Aspects EN12604, Safety in use of power operated doors
Side guide protection EN 12604: 2000 4.5.1 and EN 12453: 2000 5.1.1.3
Protection crushing, shearing or drawing in
Electrical Safety Depending on the use
Water Tightness EN 12489
Resistance to Wind Load EN 12444
Thermal resistance EN 12428
Air permeability EN 12427
Opto Safety Edge Self Monitoring
EN 12453 - 5.1.1.5
Closing Forces
(Auto close only) EN 12453 - 5.1.1.5
Anti fall back device EN 12453 - 5.1.1.5
Installation Instructions EN 12635: 2002 4.1.1.1
Durability of Mechanical Performance
EN 12635: 2002 4.1.1.1
W
H A
B
C
D
2500 2500 450 525 196 35
4000 4000 500 595 259 60
5000 5000 550 645 209 85
6000 6000 550 645 283 85
Door hood addition - Dim B + 50
All Dimensions in mm

 

secureflex_diag

 

 

.

 


We use cookies to improve our website and your experience when using it. Cookies used for the essential operation of the site have already been set. To find out more about the cookies we use and how to delete them, see our privacy policy.

I accept cookies from this site.

EU Cookie Directive Module Information