Fireflex Type S Shutters - Data Sheet


TEST: BRE Test report number 220737

Assessment report number CC 224355

INETGRITY: 240 minutes


Manufactured from pre-galvanized material, 75mm curved lath.

The curtain, when assembled is held in position with purposely-designed
end fittings, which act as a curtain alignment system.

The bottom panel of
the shutter is terminated with a galvanized steel angle with horizontal and vertical slots.


Manufactured from seamless mild steel tube to BS4760 Grade 50C.

Maximum barrel deflection measured at 1:400, fitted with precisionmachined
BDMS axles to BS970 EN33 with end fitted plate wheel.


Main support plates for the barrel and motor unit manufactured from mild steel.

Support plates to BS 4360/43A with perimeter welded angles and structure
support angles.


Formed from pre-galvanized material having a minimum thickness of 2.5mm.

The door guide is designed to allow reduced working face and tapered inner
faces to provide automatic interlock/retaining feature.


The door is arranged for an electric motor unit with fusible link or solenoid release unit complete with built on starter, or direct drive maintained power.

Technical Information
CE Mark (Declaration of conformity)
Type Approval (Chiltern Dynamics - UKAS approved test laboratory)
Testing Laboratory (BRE Testing – UKAS approved test laboratory)
Compliant with Part 1 BS EN 13241-1: 2003
Mechanical Aspects EN12604, Safety in use of power operated doors.
Side guide protection EN 12604: 2000 4.5.1 and EN 12453: 2000
Protection crushing, shearing or drawing in
Electrical Safety Depending on the use
Water Tightness EN 12489
Resistance to Wind Load EN 12444
Fire Resistance test B.S.476 : Part 22 : 1987
Integrity 241 minutes (4 hours)
Air permeability EN 12427
Gravity and self-closing EN 12453 -
Anti fall back device EN 12453 -
Installation Instructions EN 12635: 2002
Durability of Mechanical Performance
EN 12635: 2002
2500 2500 350 450
3000 3000 400 500
4000 4000 400 550
5000 5000 450 600
6000 6000 500 650
All Dimensions in mm
Door hood addition - Dim B + 50







We use cookies to improve our website and your experience when using it. Cookies used for the essential operation of the site have already been set. To find out more about the cookies we use and how to delete them, see our privacy policy.

I accept cookies from this site.

EU Cookie Directive Module Information